Chemical Methodologies

Original Article

Spectroscopic and Antimicrobial Studies of Some Metal Complexes of Furfural Schiff Base Derivative Ligand

Noor S. Hassan; Waleed K. Mahdi

Volume 7, Issue 6 , June 2023, Pages 419-434

https://doi.org/10.22034/chemm.2023.385342.1652

Abstract

A new furfural Schiff base derivative ligand (L-FSB) named N-(4-Bromo-2-methylphenyl)-1-(furan-2-yl)methanimine, was synthesized from the condensation reaction of furfural (fur) with ... Read More

Original Article

Spectrophotometric -Reverse Flow Injection Method for the Determination of Tenoxicam in Pharmaceutical Tablets

Allaa Hussein Mhdi; Sadeem Subhi Abed

Volume 7, Issue 6 , June 2023, Pages 435-446

https://doi.org/10.22034/chemm.2023.391584.1665

Abstract

In this study, reversed flow injection analysis (rFIA) spectrophotometric method was used for determination of Tenoxicam (TNX) in pure and pharmaceutical forms. This method was based ... Read More

Original Article

Investigation of Gamma-Ray Effect on Physiological and Biochemical Traits of Triticale Plant under Salinity Stress

Marjan Atghaei; Mohammad Reza Rezaie; Amin Baghizadeh; Hossein Mirshekarpour

Volume 7, Issue 6 , June 2023, Pages 447-459

https://doi.org/10.22034/chemm.2023.389655.1659

Abstract

Salinity stress alters several physiological and biochemical traits, resulting in reduced yields in different plants. Triticale, which is a hybrid of wheat and rye, is one of the most ... Read More

Original Article

Improving the Performance of 3D Perovskite Solar Cell by Adding a Moisture Stable Layer

Faeze Baktash; Farzaneh Arabpour Roghabadi; Vahid Ahmadi

Volume 7, Issue 6 , June 2023, Pages 460-482

https://doi.org/10.22034/chemm.2023.388396.1655

Abstract

Among the important factors that affect the stability of 3D Perovskite cell are humidity, ultraviolet radiation, oxygen, and temperature. Therefore, different methods have been tried ... Read More

Original Article

The Effect of Genetically Modified Food on the Level of Some Steroid Hormones in Chickens: A Pilot Study

Hathama Razooki Hasan; Adil Turki Al-Musawi; Sudad Jasim Mohammed; Aliaa Saadoon Abdul-Razzaq Al-Faraji

Volume 7, Issue 6 , June 2023, Pages 483-488

https://doi.org/10.22034/chemm.2023.389516.1660

Abstract

The advanced biological technologies, including genetic engineering, have an important role in providing the requirements for the large demands of food for human if they are used in ... Read More

Original Article

Bifunctional Polyethylene Glycol/ethylenediamine Nanomagnetic Phase-Transfer Catalyst: Preparation, Characterization, and Application in Knoevenagel Condensation

Fatemeh Hakimi; Abolfazl Sharifi-Zarchi; Elham Golrasan

Volume 7, Issue 6 , June 2023, Pages 489-498

https://doi.org/10.22034/chemm.2023.392041.1667

Abstract

In the present study, an efficient and recyclable heterogeneous phase-transfer catalyst was prepared through the functionalization of magnetic nanoparticles with ethylenediamine and ... Read More

Original Article

An Efficient Cloud Point Extraction for Doxycycline Pre-concentration in Pharmaceutical Samples prior to UV-Vis Spectrophotometric Analysis

Wasan A. Al-Uzri; Ghadah Fadhil Hussein

Volume 7, Issue 6 , June 2023, Pages 499-508

https://doi.org/10.22034/chemm.2023.391763.1666

Abstract

A sensitive and eco-friendly cloud point extraction (CPE) method was suggested for pre-concentration of micrograms amount of doxycycline hyclate (DOX) in pure and dosage forms. The ... Read More

Green Chemistry: Principles, Applications, and Disadvantages

Wanisa Abdussalam-Mohammed; Amna Qasem Ali; Asma O. Errayes

Volume 4, Issue 4 , July and August 2020, , Pages 408-423

https://doi.org/10.33945/SAMI/CHEMM.2020.4.4

Abstract

This work provides an overview on applicability of 12 principles of green chemistry. Green chemistry is a term that indicates the creation of chemical products and procedures that reduces ... Read More

Preparation of Xanthan Magnetic Biocompatible Nano-Composite for Removal of Ni^2+ from Aqueous Solution

Alireza Bozorgian; Soroush Zarinabadi; Amir Samimi

Volume 4, Issue 4 , July and August 2020, , Pages 477-493

https://doi.org/10.33945/SAMI/CHEMM.2020.4.9

Abstract

This study investigates the uptake of the nickel (II) metal ions from aqueous sources using the xanthan magnetic biocompatible nano-composites. The desired nano-sorbent was first synthesized, ... Read More

Water Purification Using Nanotechnology an Emerging Opportunities

Shalini Chaturvedi; Pragnesh N. Dave

Volume 3, Issue 1 , January 2019, , Pages 115-144

https://doi.org/10.22034/chemm.2018.143461.1069

Abstract

The most important component for living beings on the earth is access to clean and safe drinking water. Globally, water scarcity is pervasive even in water rich areas as immense pressure ... Read More

Improved Photostabilization of Chlorpyrifos Insecticide with Novel Benzil Derivatives

Gautam M. Patel; Hemant S. Parmar; Pradeep T. Deota

Volume 3, Issue 4 , July and August 2019, , Pages 481-493

https://doi.org/10.22034/chemm.2018.151723.1101

Abstract

Chlorpyrifos, an organophosphorus insecticide, is widely used in agricultural and non-agricultural areas all over the world. During field application, it readily undergoes degradation ... Read More

Cu Nanoparticle: Synthesis, Characterization and Application

N.S. Powar; V. J. Patel; P.K. Pagare; R.S. Pandav

Volume 3, Issue 4 , July and August 2019, , Pages 457-480

https://doi.org/10.22034/chemm.2019.154075.1112

Abstract

The applications of copper nanoparticle are gradually increased because of Cu is inexpensiveness and high abundance in nature. However, synthesis of copper nanoparticles is very challenging ... Read More

Original Article

Synthesis, Identification, and Antibacterial Effect Assessment of Some New 1,4-Thiazepines, Derived from Substituted Diphenyl Acrylamides and Diphenyl Dienones

Saad Salem Jasim; Jawdat Hilmi Abdulwahid; Shakhawan Beebany; Bari Lateef Mohammed

Articles in Press, Accepted Manuscript, Available Online from 20 May 2023

https://doi.org/10.22034/chemm.2023.392659.1668

Abstract

Some new 1,4-thiazepine derivatives (J16-J30) have been successfully synthesized through the reaction between each of diphenyl acryl amides (J1-J10) and diphenyl dienones (J11-J15) ... Read More Some new 1,4-thiazepine derivatives (J16-J30) have been successfully synthesized through the reaction between each of diphenyl acryl amides (J1-J10) and diphenyl dienones (J11-J15) with ortho-mercapto aniline. The reaction was performed in an alkaline medium using ethanol as a solvent. The diphenyl acryl amides were prepared from the condensation reaction of para-substituted acetanilides with different para benzaldehydes, while para-substituted benzaldehydes were reacted with acetone to produce the diphenyl dienones. All the prepared compounds have been identified, using visible and ultraviolet radiation spectrum, and infrared spectrum. Some of the new synthesized compounds have been diagnosed and confirmed their structures by proton and carbon nuclear magnetic resonance spectrum (1H-NMR and 13C-NMR, respectively). The purity of prepared compounds was confirmed by relying on thin-layer chromatography (TLC) results. The biological effect of these derivatives was assessed against certain types of gram-positive bacteria (Streptococcus Pneumonia and Staphylococcus Aureus) and gram-negative bacteria (Escherichia Coli, Pseudomonas Aeruginosa, and Proteus Moralities). The results showed a high antibacterial effect towards both types of the used bacteria at high concentrations, while the prepared compounds behaved differently at low concentrations. The results indicated that most of new thiazepines revealed a high antibacterial effect towards both types of the tested bacteria at high concentrations (100 mg/mL), while behaved oppositely at low concentrations (10 and 50 mg/mL). This is related to high concentration effect resulting in an increase for inhibition zone diameter. The highest antibacterial effect was observed for compounds (J17, J19, J21, J24, J25, J26, J28, and J30) at 100 mg/mL. One of the reasons could be the presence of halogenes and nitro groups compared to the other compounds as a result of electron withdrawal groups role.

Original Article

Ultrasound-Assisted Preparation and Optimization of Natural Flavoring Nanoemulsion for Dairy Products Based on Pistacia Khinjuk in Lab Scale

Masoumeh Khanahmadi; Fatemeh Shahrezaei; Mahdieh Sharifi; Ghasem Rezanejade Bardajee

Articles in Press, Accepted Manuscript, Available Online from 23 May 2023

https://doi.org/10.22034/chemm.2023.382181.1649

Abstract

Encapsulation process is employed to preserve flavor from inadmissible interactions with food, minimizing flavor-flavor interactions, guarding in contradiction of light-induced reactions ... Read More

Original Article

Ag-SiO2 Nanoparticles: Benign, Expedient, and Facile Nano Catalyst in Synthesis of Decahydroacridines

Morteza Farajpour; Seyed Mohammad Vahdat; Seyed Meysam Baghbanian; Mehdi Hatami

Articles in Press, Accepted Manuscript, Available Online from 23 May 2023

https://doi.org/10.22034/chemm.2023.386678.1653

Abstract

A simple approach for component reaction between aldehydes, anilines or ammonium acetate, and dimedone in ethanol as a solvent is studied using Ag-SiO2 nanoparticles. This approach ... Read More

Original Article

Static and Dynamic Study of Novel 4-Formyl-N-Hexadecyl-N,N-Dimethylbenzenaminium Bromide Synthesized as a Corrosion Inhibitor Use in Petroleum Wells Acidizing Process

Zaidoun K. Kuraimid; Abd El-Aziz S. Fouda S. Fouda; Dawood S. Abid

Articles in Press, Accepted Manuscript, Available Online from 07 June 2023

https://doi.org/10.22034/chemm.2023.395919.1677

Abstract

This study showcases the innovative synthesis of 4-formyl-N-hexadecyl-N,N-dimethylbenzenaminium bromide (FHDB) using a reaction of 1-Bromohexadecane and 4-di methyl amino benzaldehyde. ... Read More

Facts & Figures
Google Scholar (h-index)	23
Google Scholar (i10-index)	82
Google Scholar Citations	2180
WOS Citation	1806
h-index in WOS	37
Average citations per item	7.04
Quality Rank in JCR List (2021)	Q3
Journal Citation Indicator (JCI), (2021)	0.24
Issue per year	12
No. of volumes	7
No. of Issues	42
Number of Articles	360
Rejected papers	268
Acceptance rate	53
Review papers	11
Number of Submissions	681
No. of contributors	970
Time to Accept (Days)	63
Article view	351,362
PDF download	147,731
No. of reviewers	8243
Contributing countries	30
No. of databases	15

Volume 7 (2023)

Volume 6 (2022)

Volume 5 (2021)

Volume 4 (2020)

Volume 3 (2019)

Volume 2 (2018)

Volume 1 (2017)

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Indexing and Abstracting

Keywords Cloud